|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AZ6961 10 AMP SUBMINIATURE POWER RELAY FEATURES High sensitivity, 120 mW pickup Dielectric strength 5000 Vrms Isolation spacing greater than 8 mm 10 Amp switching capability Class B insulation standard, Class F version available Epoxy sealed version for automatic wave soldering and cleaning available * UL, CUR file E44211 * VDE 131637UG CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A) Resistive load: Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 240* VDC or 440 VAC UL, CUR Rating: 10 A at 250 VAC resistive [1] 8 A at 30 VDC/250 VAC [1] 8 A at 30 VDC/250 VAC, 100k cycles [2] B300 Pilot Duty [1] R300 Pilot Duty [1] 1/4 HP at 125 VAC [1] 1/2 HP at 250 VAC [1] VDE Rating: 8 A at 250 VAC * * * * * * GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 10 million 3 X 105 at 8 A 240 VAC res. 7 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time 1000 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40C (-40F) to 100C (212F) -40C (-40F) to 130C (266F) Class B -40C (-40F) to 155C (311F) Class F Break Contact: 5g at 10...500 Hz Make Contact: 20g at 10...500 Hz 10 g P.B.T. polyester, UL94 V-0 Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 8 grams *Note: if switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Silver cadmium oxide (AgCdO) [1] Silver tin oxide (AgSnO2) [2] Gold plating available < 100 milliohms initially Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 120 mW 1.2 W at 20C (68F) ambient 20C (36F) at nominal coil voltage Max. 130C (266F) Class B Max. 155C (311F) Class F Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 4. Class F version not VDE approved 2/17/05W AZ6961 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 60 Max. Continuous VDC 11.6 14.0 27.2 53.1 107.3 122.4 Coil Resistance 113 10% 164 10% 617 10% 2350 10% 9600 15% 12500 15% Must Operate VDC 3.5 4.2 8.4 16.8 33.6 42.0 ORDER NUMBER* 1 Form A (SPST-NO) AZ6961-1A-5D AZ6961-1A-6D AZ6961-1A-12D AZ6961-1A-24D AZ6961-1A-48D AZ6961-1A-60D 1 Form C (SPDT) AZ6961-1C-5D AZ6961-1C-6D AZ6961-1C-12D AZ6961-1C-24D AZ6961-1C-48D AZ6961-1C-60D *Add "E" to "-1A" or "-1C" for AgSnO2 contacts. Add suffix "E" for sealed version. Add suffix "A" for gold plated contacts. Add suffix "F" for Class F version. MECHANICAL DATA FORM C VERSION 1.132 Max [28.75] .408 Max [10.35] PC BOARD LAYOUT 5xO.051 [O1.3] .870 [22.1] .062 [1.57] .494 Max [12.55] .012 [0.3] .298 [7.56] FORM C .126 [3.2] .126 [3.2] .050 [1.3] .142 [3.6] 4xO.051 [O1.3] .744 [18.9] .116 [2.95] .050 [1.3] 2x.020 [0.5] 3x.031 [0.8] 3x.016 [0.4] .298 [7.56] FORM A .198 [5.04] VIEWED TOWARD TERMINALS FORM A VERSION 1.132 Max [28.75] .408 Max [10.35] CIRCUIT DIAGRAM .494 Max [12.55] .012 [0.3] 1 FORM C .142 [3.6] 4 1 FORM A 4 2 3 5 2 5 2x.020 [0.5] 2x.031 [0.8] 2x.016 [0.4] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 2/17/05W |
Price & Availability of AZ6961-1A-12D |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |